 |
Illuminator E & IE Single Phase 1.5kVA to 16.7kVA (UL924: 90 minutes of battery time) 120V. input/output and 277V. input/output units
- Illuminator Series IE is an interruptible lighting inverter. It transfers to inverter mode (battery power)
when utility power is interrupted for more than one line cycle. This series is capable of supporting full capacity of normally off load. The series IE is best suited for fluorescent and incandescent
lighting loads and systems that require large lighting loads
that are normally off (illuminate during emergency conditions).
- Illuminator Series E is an un-interruptible lighting
inverter. It transfers to inverter mode (battery power)
when
utility power is interrupted for less than 1mS. The line interactive
design eliminates excessive transfers to battery
power. The series E is best suited for HID lighting loads and
systems that do not require
large loads that are normally
off (illuminate during emergency
conditions)
Illuminator C-M Single Phase 500VA to 2000VA (UL924: 90 minutes of battery time) 120V. input/output and 277V. input/output units
Illuminator CIII Three Phase 4.8kVA to 50kVA (UL924: 90 minutes of battery time) 120/208Y or 277/480Y input/output
Illuminator CR/DR Designed for outdoor applications Series CR: 120 or 277VAC, Single Phase, 2W+G, 3 to 8kVA Series DR: 120/208 or 277/480VAC, 3PH, 4W+G, 4 to 8kVA
|